info@thinkSRS.com (408) 744-9040
(408) 744-9040
Home > Products > Vacuum Instruments > RGA100 series
Residual Gas Analyzer
RGA100 series — 100, 200, and 300 amu analyzers
RGA100 series ... from   $4950
Residual Gas Analyzer
100, 200 & 300 amu analyzers
RGA100 series ... from  $4950
RGA100 series ... from  $4950
 
BUY / QUOTE
BUY / QUOTE
              
  • 100, 200 and 300 amu systems
  • Better than 1 amu resolution
  • 6 orders of magnitude dynamic
    range in a single scan
  • 5 x 10-14 Torr detection limit
  • RGA Windows software
  • RS-232 & Ethernet interfaces
              
  • 100, 200 and 300 amu systems
  • Better than 1 amu resolution
  • 6 orders of magnitude dynamic
    range in a single scan
  • 5 x 10-14 Torr detection limit
  • RGA Windows software
  • RS-232 & Ethernet interfaces
              
  • 100, 200 and 300 amu systems
  • Better than 1 amu resolution
  • 6 orders of magnitude dynamic
    range in a single scan
  • 5 x 10-14 Torr detection limit
  • RGA Windows software
  • RS-232 & Ethernet interfaces
          X

RGA Series Residual Gas Analyzers

Overview
The 100, 200 and 300 amu residual gas analyzers from SRS offer exceptional performance and value. These RGA's provide detailed gas analysis of vacuum systems at about half the price of competitive models. Each RGA system comes complete with a quadrupole probe, electronics control unit (ECU), and a real-time Windows software package that is used for data acquisition and analysis, as well as probe control.
          X

RGA Front Panel

Front Panel

          X

RGA Rear Panel

              ... click for RGA Tech Support

SRS's RGA100 locates ammonia leak at the ISS

          X

The ISS Robotic External Leak Locator (RELL)

In The News ...

RGA100 Series Residual Gas Analyzers

The 100, 200 and 300 amu residual gas analyzers from SRS offer exceptional performance and value. These RGA's provide detailed gas analysis of vacuum systems at about half the price of competitive models. Each RGA system comes complete with a quadrupole probe, electronics control unit (ECU), and a real-time Windows software package that is used for data acquisition and analysis, as well as probe control.

Rugged Probe Design

Electron Multiplier

          X

RGA Electron Multiplier

RGA series

The probe consists of an ionizer, quadrupole mass filter and a detector. The simple design has a small number of parts which minimizes outgassing and reduces the chances of introducing impurities into your vacuum system. The probe assembly is rugged and mounts onto a standard 2 ¾ inch CF flange. It is covered with a stainless steel tube with the exception of the ionizer which requires just 2 ½ inches of clearance in your vacuum system—about that of a standard ion gauge. The probe is designed using self-aligning parts so it can easily be reassembled after cleaning.

Compact Electronics Control Unit

The densely packed ECU contains all the necessary electronics for controlling the RGA head. It is powered by either an external +24 VDC (2.5 A) power supply or an optional, built-in power module which plugs into an AC outlet. LED indicators provide instant feedback on the status of the electron multiplier, filament, electronics system and the probe. The ECU can easily be removed from the probe for high temperature bakeouts.

Unique Filament Design

A long-life, dual thoriated-iridium (ThO2/Ir) filament is used for electron emission. Dual ThO2/Ir filaments last much longer than single filaments, maximizing the time between filament replacement. Unlike other designs, SRS filaments can be replaced by the user in a matter of minutes.

Dual Thoriated-Iridium Filament

          X

Dual Thoriated-Iridium Filament

RGA series

Electron Multiplier

A Faraday cup detector is standard with SRS RGA systems which allows partial pressure measurements from 10-5 to 5 × 10-11 Torr. For increased sensitivity and faster scan rates, an optional electron multiplier is offered that detects partial pressures down to 5 × 10-14 Torr. This state-of-the-art macro multi-channel continuous-dynode electron multiplier (CDEM) offers increased longevity and stability and can also be replaced by the user—a first for RGAs!

Heater Jacket

The O100HJRW Heater Jacket comes with a Watlow EHG SL10 Process Controller that provides a preprogrammed temperature of 210 °C (±3 °C). The Heater Jacket is made using PTFE (Teflon) construction, suitable for clean room applications due to its low out-gassing and particle free operation. The O100HJRW is offered in 120 VAC and 220 VAC versions, and is shipped with a country of destination power cord.

Heater Jacket

          X

RGA Heater Jacket

RGA series

Useful Features

All RGAs have a built-in degassing feature. Using electron impact desorption, the ion source is thoroughly cleaned, greatly reducing the ionizer's contribution to background noise.

A firmware driven filament protection feature constantly monitors (675 Hz) for over pressure. If over pressure is detected, the filament is immediately shut off, preserving its life.

A unique temperature-compensated, logarithmic electrometer detects ion current from 10-7 to 10-15 Amps in a single scan with better than 2 % precision. This huge dynamic range means you can make measurements of small and large gas concentrations simultaneously.

Complete Programmability

Communication with computers is made via the RS-232 interface. Analog and histogram (bar) scans, leak detection and probe parameters are all controlled and monitored through a high-level command set. This allows easy integration into existing programs.

RGA Windows Software

Pressure vs. Time Mode

          X

RGA Software Pressure vs. Time Mode

RGA series

The RGA systems are supported with a real-time software package that runs on Windows OS computers. The intuitive graphical user interface allows measurements to be made quickly and easily. Data is captured and displayed in real-time or scheduled for acquisition at a given time interval for long-term data logging. Multiple spectral data and individual measurements can be collected together in one sequence. Versatile docking windows and widgets give the user various ways to organize the display. Data can be scaled manually or automatically, in linear or log format on plots. Units are selectable among Torr, Bar, Pascal and Amp. Features include common gas labels, programmable audio and visual alarms, expandable library, composition analysis, and comprehensive on-line help.

The software also allows complete RGA control with easy mass scale tuning, sensitivity calibration, ionizer setup, and electron multiplier gain adjustment. For further analysis, data files can be saved in CSV text format for easy transfer into spreadsheets. Graphic images can be saved in common formats (PNG, BMP, TIFF, JPG, SVG, PDF) or copied to the clipboard for importing directly into other programs.

Analog Mode

          X

RGA Software Analog Mode

RGA series

An optional stand-alone monitor (PPM100 RGA Monitor & Controller) can be used to control the RGA without a host computer.

Multi-Head Operation

The software supports multiple head operation when more than one RGA is needed. With a software instance independently control an RGA, multiple RGAs can be controlled and run concurrently with multiple software instances. The number of RGAs is only limited by the system resources.

Performance and Value

The SRS family of RGAs is ideal for applications involving gas analysis, leak detection, and vacuum processing. We offer 100, 200 and 300 amu systems with supporting Windows software and options that include an electron multiplier and a built-in power module for AC line operation.